Add managed Nginx HTTP-01 gateway activation and certificate status

frontend/src/locales/en-US.json

@@ -753,14 +753,15 @@
   },
   "tls": {
     "title": "Domain & certificate",
-    "description": "Use OpsX VPN for automatic HTTP-01 certificates or preview an external Nginx / Certbot gateway.",
+    "description": "Configure a public domain and use Nginx / Certbot for HTTP-01 issuance and renewal.",
     "domain": "Configured domain", "activeDomain": "Active domain", "saveDomain": "Save domain", "restartRequired": "Domain saved; restart OpsX VPN to enable ports 80/443 and automatic issuance", "saveFailed": "Could not save domain", "dns": "DNS", "certificate": "Certificate", "valid": "Valid", "pending": "Pending first HTTPS handshake",
     "notConfigured": "Disabled", "saved": "Domain configuration saved", "issuer": "Issuer", "expires": "Expires", "renewal": "Renewal", "automatic": "Automatic (autocert)",
     "ports": "HTTP / HTTPS ports", "externalPorts": "Managed by external Nginx; listener status not checked", "setupHint": "Restart to apply a saved domain or mode. Before switching to Nginx, follow the deployment guide to install it, issue a certificate, and validate the configuration. Go mode caches certificates in data/acme; saving settings alone does not issue a certificate.",
     "refresh": "Refresh status", "openHttps": "Open HTTPS health check", "loadFailed": "Could not load certificate status",
     "mode": "Public entry mode", "goMode": "Go automatic certificate (binds 80/443)", "nginxMode": "Nginx proxy (external 80/443)", "saveMode": "Save entry mode",
-    "nginxHint": "Saving this mode does not install or start Nginx. Install Nginx and Certbot, verify issuance, configuration and renewal, then restart OpsX VPN. Go will no longer bind 80/443.",
-    "externalRenewal": "Managed by Certbot (separate deployment required)", "previewNginx": "Preview Nginx configuration", "previewOnly": "Read-only preview; nothing has been installed or enabled. Use HTTP for issuance first, then enable HTTPS after the certificate exists.", "httpSite": "HTTP-01 site", "httpsSite": "HTTPS management site",
+    "nginxHint": "Save the Nginx mode and domain, restart the service, then enable the site and request a certificate. Public ports 80/443 must be open.",
+    "externalRenewal": "Managed by Certbot", "previewNginx": "Preview Nginx configuration", "previewOnly": "Configuration preview; HTTP handles issuance and HTTPS starts after the certificate exists.", "httpSite": "HTTP-01 site", "httpsSite": "HTTPS management site",
+    "siteStage": "Site stage", "stage_none": "Inactive", "stage_http": "HTTP-01 ready; certificate pending", "stage_https": "HTTPS configuration enabled", "activateSite": "Enable site and issue certificate", "activateHint": "Checks existing sites and ports first. Certbot registration uses no email address, so renewal failures cannot be reported by email.", "siteReady": "HTTPS site and certificate are ready", "siteFailed": "Gateway or certificate setup failed; see output",
     "setupTitle": "Optional HTTPS public gateway", "setupStepCheck": "Detect system", "setupStepInstall": "Install dependencies", "setupStepConfigure": "Configure gateway and certificate", "detectedSystem": "Server OS", "setupUnsupported": "Automatic setup requires root on Ubuntu or TencentOS Server 4", "setupScope": "Use only if you choose the Nginx gateway. Installs Nginx / Certbot and prepares the validation directory. It does not install VPN protocol dependencies, enable ports, or issue certificates.", "setupButton": "Prepare Nginx / Certbot", "setupComplete": "Dependencies are ready; configure the site and certificate next", "setupFailed": "Initialization failed; inspect the output", "setupInterrupted": "Log connection interrupted; refresh status. Installation may still be running on the server",
     "commonSetupTitle": "First-time shared network setup", "commonSetupHint": "Check permissions, default route and IPv4 forwarding. Enable shared forwarding only when needed; install protocol-specific dependencies separately in Create Tunnel.", "hostRoot": "Privileges", "hostRoute": "Default route", "hostForward": "IPv4 forwarding", "enableForwarding": "Enable IPv4 forwarding", "forwardingEnabled": "IPv4 forwarding enabled"
   },

frontend/src/locales/zh-CN.json

@@ -753,14 +753,15 @@
   },
   "tls": {
     "title": "域名与证书",
-    "description": "可选择由 opsx-vpn 自动管理 HTTP-01 证书，或预览 Nginx / Certbot 外部入口配置。",
+    "description": "配置公网域名，使用 Nginx / Certbot 申请并自动续签 HTTP-01 证书。",
     "domain": "配置域名", "activeDomain": "当前监听域名", "saveDomain": "保存域名", "restartRequired": "域名已保存，重启 opsx-vpn 后才会监听 80/443 并启用自动签发", "saveFailed": "保存域名失败", "dns": "DNS 解析", "certificate": "证书", "valid": "有效", "pending": "等待首次 HTTPS 请求签发",
     "notConfigured": "未启用", "saved": "域名配置已保存", "issuer": "颁发者", "expires": "到期时间", "renewal": "续签", "automatic": "自动（autocert）",
     "ports": "HTTP / HTTPS 端口", "externalPorts": "由外部 Nginx 管理，尚未检测监听状态", "setupHint": "保存域名或入口模式后需重启生效；切换为 Nginx 前须按部署文档完成安装、证书签发和配置校验。Go 模式证书缓存于 data/acme；保存配置本身不会签发证书。",
     "refresh": "刷新状态", "openHttps": "打开 HTTPS 健康检查", "loadFailed": "读取证书状态失败",
     "mode": "公网入口模式", "goMode": "Go 自动证书（进程监听 80/443）", "nginxMode": "Nginx 代理（外部监听 80/443）", "saveMode": "保存入口模式",
-    "nginxHint": "仅保存模式不会安装或启动 Nginx。先安装 Nginx 和 Certbot，完成签发、配置检查与续期测试，再重启 opsx-vpn；重启后 Go 不再监听 80/443。",
-    "externalRenewal": "由 Certbot 管理（需单独部署）", "previewNginx": "预览 Nginx 配置", "previewOnly": "以下为只读配置预览，尚未安装或启用；HTTP 站点先用于签发，HTTPS 站点只在证书已存在后启用。", "httpSite": "HTTP-01 站点", "httpsSite": "HTTPS 管理站点",
+    "nginxHint": "选择 Nginx 模式并保存域名后重启服务，再点击启用站点申请证书。端口 80/443 需允许公网访问。",
+    "externalRenewal": "由 Certbot 管理", "previewNginx": "预览 Nginx 配置", "previewOnly": "以下为配置预览；HTTP 站点用于签发，HTTPS 站点在证书存在后启用。", "httpSite": "HTTP-01 站点", "httpsSite": "HTTPS 管理站点",
+    "siteStage": "站点阶段", "stage_none": "未启用", "stage_http": "HTTP-01 已准备，证书待签发", "stage_https": "HTTPS 配置已启用", "activateSite": "启用站点并申请证书", "activateHint": "启用前会检查现有站点及端口；冲突时停止并提示。证书采用 Certbot 无邮箱注册，续签失败时不会收到邮件通知。", "siteReady": "HTTPS 站点与证书已就绪", "siteFailed": "站点或证书配置失败，请查看输出",
     "setupTitle": "可选 · HTTPS 公网入口", "setupStepCheck": "检测系统", "setupStepInstall": "安装依赖", "setupStepConfigure": "配置入口与证书", "detectedSystem": "服务器系统", "setupUnsupported": "自动初始化仅支持以 root 运行的 Ubuntu 或 TencentOS Server 4", "setupScope": "仅在选择 Nginx 入口时点击：按需安装 Nginx / Certbot 并准备验证目录；不会安装 VPN 协议依赖、启用端口或签发证书。", "setupButton": "准备 Nginx / Certbot", "setupComplete": "依赖已准备，继续配置站点与证书", "setupFailed": "初始化失败，请查看输出", "setupInterrupted": "日志连接中断，请刷新状态；服务器上的安装可能仍在继续",
     "commonSetupTitle": "首次引导 · 通用网络环境", "commonSetupHint": "检查服务权限、默认出口和 IPv4 转发。仅按需开启通用转发；各专线协议的依赖在“创建专线”中分别安装。", "hostRoot": "运行权限", "hostRoute": "默认出口", "hostForward": "IPv4 转发", "enableForwarding": "开启 IPv4 转发", "forwardingEnabled": "IPv4 转发已开启"
   },