{
  "code": {
    "1000": "连接失败，请检查网络或主机地址",
    "1001": "连接超时，请检查网络或稍后重试",
    "1002": "认证失败，请检查用户名和密码",
    "1003": "主机不可达，请检查网络配置",
    "1004": "连接已关闭",
    "1100": "终端创建失败",
    "1101": "命令执行失败",
    "1102": "端口转发设置失败",
    "1200": "SFTP 连接失败",
    "1201": "文件不存在",
    "1202": "权限不足，无法访问该文件或目录",
    "1203": "文件传输失败",
    "1204": "无法读取目录内容",
    "1300": "会话不存在",
    "1301": "保存会话失败",
    "1302": "加载会话失败",
    "1400": "主机地址格式不正确",
    "1401": "端口号必须在 1-65535 之间",
    "1402": "凭据格式不正确",
    "9000": "发生未知错误",
    "9001": "内部通信错误",
    "9002": "文件系统错误",
    "9003": "网络错误"
  },
  "action": {
    "retry": "重试",
    "reconnect": "重新连接",
    "ignore": "忽略",
    "exit": "退出",
    "none": "无"
  },
  "connection": {
    "failed": "连接失败，请检查网络或主机地址",
    "timeout": "连接超时，请检查网络或稍后重试",
    "authFailed": "认证失败，请检查用户名和密码",
    "hostUnreachable": "主机不可达，请检查网络配置",
    "closed": "连接已关闭",
    "dnsFailed": "无法解析主机",
    "refused": "连接被拒绝",
    "disconnected": "连接已断开",
    "keepaliveFailed": "SSH 心跳连续失败，连接已关闭",
    "idleKicked": "远端 Shell 因空闲超时退出（TMOUT）",
    "unexpectedDropped": "连接已断开（网络中断或服务器关闭）",
    "shellExited": "远端 Shell 已退出（exit、Ctrl+D 或服务器策略）",
    "shellReadFailed": "远端 Shell 读取失败"
  },
  "auth": {
    "failed": "认证失败，请检查用户名和密码",
    "invalidCredentials": "凭据格式不正确",
    "keyLoadFailed": "无法加载私钥",
    "passphraseRequired": "私钥需要口令",
    "passphraseWrong": "私钥口令不正确"
  },
  "shell": {
    "createFailed": "终端创建失败",
    "execFailed": "命令执行失败",
    "localCreateFailed": "创建本地 Shell 失败",
    "remoteCreateFailed": "创建远端 Shell 失败"
  },
  "proxy": {
    "connectFailed": "代理连接失败",
    "authFailed": "代理认证失败",
    "tunnelFailed": "代理隧道建立失败",
    "unsupported": "不支持的代理类型",
    "jumpFailed": "跳板机连接失败",
    "hostRequired": "代理 host 不能为空",
    "hostNoSpaces": "代理 host 不能包含空格",
    "portRequired": "代理 port 必须大于 0",
    "portTooHigh": "代理 port 不能超过 65535"
  },
  "forward": {
    "failed": "端口转发设置失败",
    "bindFailed": "端口绑定失败",
    "alreadyInUse": "本地端口已被占用。请先暂停本规则或其它占用该端口的进程，再启动。",
    "remoteDenied": "远端拒绝远程端口转发（AllowTcpForwarding / PermitListen、端口占用或绑定限制）。当前仅在远端 127.0.0.1 监听。",
    "remoteDeniedPrivileged": "远端拒绝特权监听端口（<1024）。请改用 ≥1024，或以 root 监听，并检查 AllowTcpForwarding / PermitListen。",
    "invalidTargetHost": "目标地址不能是 0.0.0.0，请填 127.0.0.1 或远端可达的内网 IP"
  },
  "sftp": {
    "connectFailed": "SFTP 连接失败",
    "fileNotFound": "文件不存在",
    "permissionDenied": "权限不足，无法访问该文件或目录",
    "transferFailed": "文件传输失败",
    "listFailed": "无法读取目录内容",
    "readFailed": "读取失败",
    "writeFailed": "保存失败",
    "renameFailed": "重命名失败",
    "chmodFailed": "权限修改失败",
    "apiUnavailable": "SFTP API 不可用",
    "channelFailed": "无法打开 SFTP 通道（服务器限制或会话繁忙），请重连后再试",
    "sessionGone": "SFTP 会话已结束，请重新连接",
    "busy": "正在传输文件，请稍后再试",
    "editTooLarge": "文件过大，文本编辑上限约 2MB。请下载后用本地编辑器打开。",
    "editBinary": "该文件像是二进制内容，无法用文本编辑器打开",
    "editNotUtf8": "远程文件不是有效 UTF-8 文本",
    "transferCancelled": "传输已取消",
    "diskFull": "磁盘空间不足（本地或远程）"
  },
  "session": {
    "notFound": "会话不存在",
    "saveFailed": "保存会话失败",
    "loadFailed": "加载会话失败",
    "readConfigFailed": "无法读取会话配置",
    "exportWriteFailed": "写入导出文件失败",
    "exportFailed": "导出会话失败",
    "importReadFailed": "读取文件失败",
    "importFailed": "导入会话失败",
    "importEmpty": "未找到可导入的会话"
  },
  "validation": {
    "invalidHost": "主机地址格式不正确",
    "invalidPort": "端口号必须在 1-65535 之间",
    "invalidCredentials": "凭据格式不正确",
    "hostRequired": "请输入主机地址",
    "usernameRequired": "请输入用户名",
    "targetRequired": "请输入主机，例如 root@192.168.1.10 或 opsbase.cn:5555",
    "serialPathRequired": "请输入串口设备路径",
    "taskRequired": "请输入任务或追问"
  },
  "filesystem": {
    "error": "文件系统错误",
    "readFailed": "读取文件失败",
    "writeFailed": "写入文件失败"
  },
  "clipboard": {
    "readFailed": "读取剪贴板失败",
    "writeFailed": "写入剪贴板失败",
    "copyPathFailed": "复制路径失败",
    "unsupportedRead": "当前环境不支持读取剪贴板",
    "unsupportedWrite": "当前环境不支持写入剪贴板"
  },
  "ipc": {
    "error": "内部通信错误",
    "nativeApiUnavailable": "原生 API 不可用"
  },
  "network": {
    "error": "网络错误"
  },
  "pool": {
    "limitReached": "连接数达到上限 ({{max}})，请先关闭一些连接"
  },
  "desktop": {
    "connectFailed": "连接失败",
    "fileTooLarge": "单文件上限 50MB",
    "nativeOnly": "远程连接仅在 OpsXShell Tauri 原生应用中可用",
    "rdpNativeOnly": "RDP 仅在 OpsXShell Tauri 原生应用中可用",
    "vncNativeOnly": "VNC 仅在 OpsXShell Tauri 原生应用中可用"
  },
  "serial": {
    "openFailed": "打开串口失败",
    "writeFailed": "串口写入失败",
    "nativeOnly": "串口仅在 Tauri 原生应用中可用"
  },
  "ai": {
    "noProvider": "请先在设置 → 大模型里配置供应商",
    "noApiKey": "「{{provider}}」尚未保存 API 密钥",
    "modelEmpty": "模型未返回内容",
    "protocolFailed": "模型连续两次未遵循协议，已停止",
    "noConclusion": "模型未返回可用结论",
    "multipleCommands": "模型一次返回了多个命令，已拒绝执行",
    "invalidCommand": "模型未返回唯一的单行命令，已拒绝执行",
    "repeatLoop": "检测到重复命令循环，已停止：{{command}}",
    "criticalBlocked": "命令命中破坏性操作硬红线，不提供确认放行：{{command}}",
    "execFailed": "远程执行失败：{{error}}",
    "maxSteps": "已达 {{max}} 步上限，请缩小范围后重试",
    "sshRequired": "需要已连接的远程 SSH",
    "maxStepsIncomplete": "未完成（incomplete:max_steps）：已达 {{max}} 步预算。可缩小范围或追问续跑。"
  },
  "zmodem": {
    "readFailed": "读取失败: {{name}}",
    "writeFailed": "写入失败: {{name}}"
  },
  "native": {
    "taskJoin": "后台任务失败，请重试",
    "invalidBase64": "文件数据不是有效的 Base64",
    "knownHostsPath": "无法定位 ~/.ssh/known_hosts",
    "invalidHostKeyDecision": "主机密钥决定无效"
  },
  "unknown": {
    "error": "发生未知错误"
  }
}